Hand Tools - Electrical
CABLE CUTTING HAND TOOL 9" LONG
CCT
- Forged steel cable cutter.
- 9" size, easily fits any tool box.
- 6 month manufacturer’s warranty.
- Cuts soft copper cable up to 2/0 gauge.
- Ergonomic, insulated grips for user protection.
$0.00
CRIMP TOOL/STRIPPER CRIMPS/STRIPS 10-26 AWG
CT101
- 8 ½” multipurpose electricians tool.
- Two wire cutters; one at tip, the other halfway back near stripping holes.
- Crimps insulated 10 to 26 AWG and non-insulated 10 to 22 AWG terminals.
- Cuts and strips 8 to 11 AWG solid and 10 to 26 AWG stranded wire.
- Cleanly shears bolts.
- Left and right hand wire looping holes near tip.
- Full sized- plastic covered cushioned handles for comfort.
- Crimping dies color coded for easy identification.
$0.00
CRIMP TOOL-RATCHETING 8 - 2 GAUGE, POWER COMP. LUGS
CT4290
- 10-1/2” ratcheting crimp tool.
- Rotatable die is color coded to industry standards.
- For crimping power compression lugs and splices.
- Crimps 8 to 2 AWG.
- State of the art ergonomics.
- Easy reach frame.
- Molded cushion grips.
- Handle length facilitates two handed crimps when necessary.
- Ratchet design generates more force with less user effort.
$0.00
CRIMP TOOL-DEUTSCH RATCHETING
DCT
- 4 indent crimper.
- For crimping of closed-barrel D-sub contacts.
- Adjustable pin height locator.
- Comfortable handles for low effort operation.
- Crimps 20 to 12 AWG.
- Can be used with Deutsch DT series contacts.
$0.00
CABLE CUTTER - HEAVY DUTY 22" CUTS UP TO 250 MCM COPPER
HDCC
- Heavy duty cable cutter.
- Cuts soft copper cable up to 250MCM (6/0 gauge).
- 22" handles for easier cutting.
- Blades made of 1075 carbon steel, hardened for long life, can be resharpened.
- Made in North America.
- 6 month warranty.
$0.00
CRIMP TOOL-HAMMER STYLE
HCT
- Hammer style crimping tool.
- Use with hammer, vise or press.
- Spring loaded pin locks in “up” position for loading connector and cable.
- When released pin holds connector securely during crimping.
- Inexpensive, simple crimping tool.
- Crimps 8 thru 4/0 gauge connectors.
- Reliable and economical.
$0.00
CRIMP TOOL-HEAVY DUTY 26" 8 GAUGE- 4/0 GAUGE
HDHC
- Heavy duty 26” hand held crimper.
- Adjustable rotating color coded dies help identify proper crimp setting.
- Application data listed on tool.
- Comfortable hand grips.
- Crimps all major brands of connectors.
- Crimps 8 thru 4/0 gauge.
- Made in North America.
$0.00
CRIMP TOOL-RATCHETING 22-10 GAUGE HEAT SHRINK TERM.
HSRCT2
- Ratcheting crimp tool.
- Color code wire sizes: red 22-18 gauge, blue 16-14 gauge, yellow 12-10 gauge.
- Crimps 22 through 10 gauge insulated and heat shrink terminals.
- Ratcheting mechanism design.
$0.00
CRIMP TOOL-RATCHETING 22-8 GAUGE HEAT-SHRINK-TERM.
HSRCT
- Release switch if terminal or wire is inserted improperly.
- 4 crimp nests - 8, 10-12, 14-16 and 18-22 AWG.
- Alignment guide to ensure dies wont slip during crimping.
- Designed for insulated connectors.
- Ensures uniform crimp termination regardless of user.
- High quality, economical tool.
- Ratcheting crimp tool.
$0.00
CRIMP TOOL-RATCHETING METRIPACK 150/280 SEALED
MP12085270
- Weather-pack and Metri-pack crimp toool.
- Used for sealed terminals.
- Core and insulation wings are crimped in a separate motion.
- 5 marked nests and quick release.
- Will clinch seals on Metri-pack 150,280,480 and 630 series.
- Crimps Weather-pack and Metri-pack terminals 24-14 gauge.
- Made in America.
$0.00
TOOL-NARROW PICK WEATHERPACK DELPHI #12094429
WPNPT
- Terminal pick.
- Tapers to a .035" width.
- Used to release 150 Metri-Pack, 280 Metri-Pack, 280 Tangless, 630 Pull to Seat, GT150, and Wedge Base lamp socket terminals.
- Replaces Delphi tool 12094429.
- Can also be used for Weatherpack.
$0.00
CRIMP TOOL-RATCHETING WEATHERPACK-#12014254
WPRCT
- Weather-pack ratchet crimp tool.
- Designed to crimp sealed male and female terminals and seals 20 to 14 gauge.
- Core and insulation wings are crimped in a single motion.
- Features two nests clearly marked with wire gauges, a safety release, and a terminal locator.
- Equivalent to Delphi 12014254.
$0.00
TOOL-TERM. EXTRACT WEATHERPACK DELPHI #12014012
WPTET
- Terminal release tool.
- Designed solely to depress Weather-Pack terminal retention barbs to allow terminal removal from tower or shroud.
- Equivalent to Delphi tool 12014012.
$0.00
WIRE STRIPPER W/ SPRING 10-18 GA SOL./12-20 GA STRAND.
WS120T
- Wire stripping tool.
- Form-ground, hardened, knife-type blades for accurate stripping.
- Tough steel construction.
- Built-in wire cutter and wire looping holes.
- Plier nose for extra gripping strength.
- Laser-etched wire gauge markings.
- Spring-loaded automatic opening.
- Corrosion-resistant, black oxide finish.
- Will strip solid copper wire 10-18 gauge.
- Will strip stranded copper 12-20 gauge.
$0.00
WIRE STRIPPER/ STRIPMASTER 10-20 GA. IDEAL
WS45092
- Ideal Stripmaster wire stripper.
- Knife-type blades.
- Cleanly strips wire up to 7/8 inch.
- One-third less hand pressure for each strip.
- Eliminates nicking, cutting and fraying of wire.
- Wire gripper holds wire centered in hole.
- Will strip 10 to 22 gauge wire.
$0.00
CRIMP TOOL 24-14 GA.
XA16004
- Open barrel terminal crimp tool.
- Five cavities perform “B” type conductor and insulation crimps.
- Conductor crimp maximum range is 12 to 14 AWG.
- Insulation crimp maximum range is 24 to 14 AWG.
- Overall length of tool is 8-1/2".
- Duplicates factory crimp on open barrel terminals used in automotive, computer and control applications.
$0.00
CIRCUIT TESTER 24 VOLT WIRELESS
XCT8002
- Computer, safe, all solid state electronics circuit tester.
- Safe to use around automotive computers, electronics, sensors and air bags.
- It requires no wire or clip connector to ground.
- The XCT8002's LED, sound and vibration indicators, allow users to check for power in less time.
- Designed for use in automobiles, trucks, tractors, trailers, RV's, motorcycles, boats and any DC powered circuit from 3 to 28 volts.
- Safety V-groove needle accessory for piercing and carrying.
- This professional, rugged, stainless steel metal construction tester is built to last, damage resistant, and easy to use.
- Solid state lamp for lifetime lasting performance.
- Long-life N size alkaline batteries installed.
$0.00
MICRO TORCH-HAND HELD BLAZER/SELF-IGNITING WTH BASE
XGB2001
- Hand-held, butane refillable, micro torch.
- Features state of the art Piezo electric ignition system to support up to a 2500° flame.
- Air adjustment and gas flow knobs for superior flame control.
- The main tank body features a diamond grid design for a superior and extra safe, grip and also includes a detachable base for hands free table-top work.
- Ideal for automotive repair work, electronic systems repair, plumbing, soldering, heat shrink tubing, HVAC, and other professional repair shop work.
$0.00
KLEIN HIGH LEVERAGE CABLE CUTTER
XKLN63050
- Klein high-leverage cable cutter, made in the US from tool steel.
- High-leverage design for exceptional cutting capability.
- Precision, one-hand shearing action.
- Cable-gripping shear-type jaws.
- Perfect for working in confined spaces.
- Hot-riveted joint ensures smooth action and no handle wobble.
- Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges.
- Through-hardened for longer-lasting cutting surfaces.
- Maximum cable cutting capacity: 4/0 aluminum, 2/0 soft copper.
$0.00
INFRARED THERMOMETER -20 TO +1000 DEGREES
XLTX10
- Contactless infrared thermometer with laser sight.
- Useful in all kinds of applications such as automotive, industrial, marine, agricultural, aviation, HVAC and farming.
- Performs quick measurements from a safe distance or in hard to reach places.
- Temperature range of -20°s F to 1000°s F.
- 10:1 optical ratio.
- Selectable scales:°s C/degrees F.
- Laser on/off feature.
- Convenient soft pouch for carrying.
- Large LCD display with symbols and backlight.
- Auto power off.
$0.00
PLASTIC TUBE CUTTER TOOL 1/8"- 3/8" ID
XPTC
- Plastic tube cutter.
- Cuts nylon and plastic tubing from 1/8" to 3/8" i.d.
$0.00
MICRO TORCH-HAND HELD MASTER/SELF-IGNITING WTH BASE
XSX2050
- Butane-powered micro torch utilizing an open flame.
- May be hand-held, or used "hands-free" on a flat surface, due to it’s wide, stable base.
- Built-in self-igniting system with safety lock which ensures the switch is not turned on when not in use.
- Built-in refillable plastic fuel tank.
- Temperatures up to 2500°s F with open flame; 932°s F with hot air tip.
- 2 hour continuous run time.
- Adjustable flame that will protect a broad, or pinpoint flame.
- Use to heat materials, ignite materials, pinpoint torch, heat shrink tubing, solder and de-solder.
$0.00
KNIPEX FORGED WIRE STRIPPER 10-20 AWG 8"
FWST8
- Cuts 6-32 and 8-32 screws without threading
- Easy to locate stripping holes by using one of the locating ridges
- Strips 10 to 20 AWG – both solid and stranded wire
- Lock can be accessed by left or right-handed users
- 8” overall length
$0.00
- 1
- 2
Refine
9 More
5 More
11 More