Grommets

View as Grid List
Sort by
Display items per page

GROMMET SNAP IN - NYLON 11/16" DIAM, 7/8" DRILL

1116HEYG
  • Insulating bushing
  • Molded in black heat stabilized nylon UL 94V2.
  • Meet Underwriters Laboratories and Canadian Standards.
  • Designed with multiple locks to positively snap in panels.
  • Many practical uses in control boxes and firewalls for smooth transitions.
  • Inside diameter: .687"
  • Head diameter: .953"
  • For panel hole size: 7/8"
    $0.00
    + -

    GROMMET SNAP IN - NYLON 1/2" DIAM, 5/8" DRILL

    12HEYG
    • Insulating bushing
    • Molded in black heat stabilized nylon UL 94V2.
    • Meet Underwriters Laboratories and Canadian Standards.
    • Designed with multiple locks to positively snap in panels.
    • Many practical uses in control boxes and firewalls for smooth transitions.
    • Inside diameter: 1/2"
    • Head diameter: .718"
    • For panel hole size: 5/8"
      $0.00
      + -

      GROMMET SNAP IN - NYLON 1/4" DIAM, 0.375" DRILL

      14HEYG
      • Insulating bushing
      • Molded in black heat stabilized nylon UL 94V2.
      • Meet Underwriters Laboratories and Canadian Standards.
      • Designed with multiple locks to positively snap in panels.
      • Many practical uses in control boxes and firewalls for smooth transitions.
      • Inside diameter: 1/4"
      • Head diameter: .468"
      • For panel hole size: 3/8"
        $0.00
        + -

        GROMMET SNAP IN - NYLON 1/8" DIAM, 0.187" DRILL

        18HEYG
        • Insulating bushing
        • Molded in black heat stabilized nylon UL 94V2.
        • Meet Underwriters Laboratories and Canadian Standards.
        • Designed with multiple locks to positively snap in panels.
        • Many practical uses in control boxes and firewalls for smooth transitions.
        • Inside diameter: 1/8"
        • Head diameter: 1/4"
        • For panel hole size: 3/16"
          $0.00
          + -

          GROMMET SNAP IN - NYLON 3/4" DIAM, 1" DRILL

          34HEYG
          • Insulating bushing
          • Molded in black heat stabilized nylon UL 94V2.
          • Meet Underwriters Laboratories and Canadian Standards.
          • Designed with multiple locks to positively snap in panels.
          • Many practical uses in control boxes and firewalls for smooth transitions.
          • Inside diameter: 3/4"
          • Head diameter: 1.125"
          • For panel hole size: 1"
            $0.00
            + -

            GROMMET SNAP IN - NYLON 3/16" DIAM, 0.312" DRILL

            36HEYG
            • Insulating bushing
            • Molded in black heat stabilized nylon UL 94V2.
            • Meet Underwriters Laboratories and Canadian Standards.
            • Designed with multiple locks to positively snap in panels.
            • Many practical uses in control boxes and firewalls for smooth transitions.
            • Inside diameter: 3/16"
            • Head diameter: 3/8"
            • For panel hole size: 5/16"
              $0.00
              + -

              GROMMET SNAP IN - NYLON 3/8" DIAM, 0.500" DRILL

              38HEYG
              • Insulating bushing
              • Molded in black heat stabilized nylon UL 94V2.
              • Meet Underwriters Laboratories and Canadian Standards.
              • Designed with multiple locks to positively snap in panels.
              • Many practical uses in control boxes and firewalls for smooth transitions.
              • Inside diameter: 3/8"
              • Head diameter: .578"
              • For panel hole size: 1/2"
                $0.00
                + -

                GROMMET SNAP IN - NYLON 5/16" DIAM, 0.437" DRILL

                56HEYG
                • Insulating bushing
                • Molded in black heat stabilized nylon UL 94V2.
                • Meet Underwriters Laboratories and Canadian Standards.
                • Designed with multiple locks to positively snap in panels.
                • Many practical uses in control boxes and firewalls for smooth transitions.
                • Inside diameter: 5/16"
                • Head diameter: .531"
                • For panel hole size: 7/16"
                  $0.00
                  + -

                  GROMMET SNAP IN - NYLON 5/8" DIAM, 3/4" DRILL

                  58HEYG
                  • Insulating bushing
                  • Molded in black heat stabilized nylon UL 94V2.
                  • Meet Underwriters Laboratories and Canadian Standards.
                  • Designed with multiple locks to positively snap in panels.
                  • Many practical uses in control boxes and firewalls for smooth transitions.
                  • Inside diameter: 5/8"
                  • Head diameter: .843"
                  • For panel hole size: 3/4"
                    $0.00
                    + -

                    GROMMET SNAP IN - NYLON 7/8" DIAM, 1.093" DRILL

                    78HEYG
                    • Insulating bushing
                    • Molded in black heat stabilized nylon UL 94V2.
                    • Meet Underwriters Laboratories and Canadian Standards.
                    • Designed with multiple locks to positively snap in panels.
                    • Many practical uses in control boxes and firewalls for smooth transitions.
                    • Inside diameter: 7/8"
                    • Head diameter: 1.218"
                    • For panel hole size: 1.093"
                      $0.00
                      + -

                      FLEXIFORM GROMMET FITS EASILY IN ALL SHAPES AND HOLE SIZES

                      CG.109
                      • Made from lightweight polyethylene.
                      • Natural in color.
                      • Polyethylene is not affected by ordinary solvents and is resistant to abrasion.
                      • This flexible grommeting can be used for round, square and irregular shaped panels.
                      • 12" lengths.
                      • Good for indoor applications.
                        $0.00
                        + -

                        SNAP-IN GROMMET 7/16" I.D. .562 DRILL

                        X76HEYG
                        $0.00
                        + -

                        RUBBER GROMMET 1 5/16 I.D. 1 5/8 DRILL 1/16 GROOVE

                        XAI2803
                        $0.00
                        + -

                        RUBBER GROMMET 1/2 I.D. 3/4 DRILL 1/8 GROOVE

                        XAI0653
                        • Rubber Grommet
                        • 1/2" ID
                        • 3/4" Drill
                        • 1/8" Groove
                          $0.00
                          + -

                          RUBBER GROMMET CONE 55/64 DRILL 5/8 I.D.

                          XAI5436EPDM40
                          • 55/64" DRILL
                            $0.00
                            + -

                            RUBBER GROMMET 1 1/4 I.D. 1/4 GROOVE 1 5/8 DRILL

                            XAI6313
                            • Rubber Grommet
                            • 1-1/4" ID
                            • 1-5/8" Drill
                            • 1/4" Groove
                              $0.00
                              + -

                              RUBBER GROMMET 3/8 I.D. 5/8 DRILL 3/16 GROOVE

                              XAIM2758
                              • Protects wires from chafing against drilled holes.
                              • Grommets are sized by groove width, inside dimension, and groove diameter.
                              • Made from 60 durometer SBR rubber.
                              • 3/8" inside dimension, 5/8" drill hole, with a 3/16" groove.
                                $0.00
                                + -

                                RUBBER GROMMET 1/4 I.D. 3/8 DRILL 3/32 GROOVE

                                XAIM2901
                                $0.00
                                + -

                                RUBBER GROMMET 1"ID, 1-3/8"DRILL, 1/16"GRV

                                RG1
                                • Protects wires from chafing against drilled holes.
                                • Grommets are sized by groove width, inside dimension, and groove diameter.
                                • Made from 60 durometer SBR rubber.
                                • 1" inside dimension, 1-3/8" drill hole, with a 1/16" groove.
                                  $0.00
                                  + -

                                  RUBBER GROMMET 11/16"ID, 1"DRILL, 1/4"GRV

                                  RG1116-14
                                  • Protects wires from chafing against drilled holes.
                                  • Grommets are sized by groove width, inside dimension, and groove diameter.
                                  • Made from 60 durometer SBR rubber.
                                  • 11/16" inside dimension, 1" drill hole, with a 1/4" groove.
                                    $0.00
                                    + -

                                    RUBBER GROMMET 1"ID, 1-3/8"DRILL, 1/4"GRV

                                    RG1-14
                                    • Protects wires from chafing against drilled holes.
                                    • Grommets are sized by groove width, inside dimension, and groove diameter.
                                    • Made from 60 durometer SBR rubber.
                                    • 1" inside dimension, 1-3/8" drill hole, with a 1/4" groove.
                                      $0.00
                                      + -

                                      RUBBER GROMMET 1/2"ID, 13/16 DRILL, 1/4"GRV

                                      RG12-14
                                      • Protects wires from chafing against drilled holes.
                                      • Grommets are sized by groove width, inside dimension, and groove diameter.
                                      • Made from 60 durometer SBR rubber.
                                      • 1/2" inside dimension, 13/16" drill hole, with a 1/4" groove.
                                        $0.00
                                        + -

                                        RUBBER GROMMET 1/2"ID, 13/16"DRILL, 1/8"GRV

                                        RG12-18
                                        • Protects wires from chafing against drilled holes.
                                        • Grommets are sized by groove width, inside dimension, and groove diameter.
                                        • Made from 60 durometer SBR rubber.
                                        • 1/2" inside dimension, 13/16" drill hole, with a 1/8" groove.
                                          $0.00
                                          + -

                                          RUBBER GROMMET 11/16" ID 3/16" GROOVE

                                          RG1116-316
                                          $0.00
                                          + -
                                          Refine
                                          ×
                                          5 More
                                          10 More
                                          18 More