Fuse Holders
FUSE HOLDER - GLASS FUSES 20 AMP, 14 GAUGE LEADS
20AFH
- Glass tube fuseholder.
- Universal holder, with springs to adapt to different fuse lengths.
- Can handle 1/4" diameter x 7/8" to 1-1/4" fuses.
- 14 gauge wire loop leads.
- 20 amp.
$0.00
FUSE HOLDER - GLASS FUSES 30 AMP, 12 GAUGE LEADS
30AFH
- Glass tube fuseholder.
- Can handle 1/4" diameter x 1-1/4" long and SFE20 fuses.
- 12 gauge wire loop leads.
- 30 amp.
$0.00
FUSE HOLDER - GLASS FUSES 30 AMP, 10 GAUGE RED LEADS
30AFH-10
- Glass tube fuseholder.
- Can handle 1/4" diameter x 1-1/4" long and SFE20 fuses.
- 10 gauge wire loop leads.
- 30 amp.
$0.00
FUSE HOLDER - ATO/ATC 30 AMP, 12 GAUGE LEADS
ATCFH
- In-line fuse holder for ATO/ATC fuses.
- Black fuseholder.
- Tough nylon body with Delphi Packard terminals that resist vibration.
- Open design does not trap moisture.
- Rated 30 amps.
- 10" loop of orange12-gauge GXL wire (fuse not supplied).
$0.00
FUSE HOLDER - ATO/ATC 18-14 GAUGE, SCOTCHLOK
ATCFH3M
- Self-stripping fuse holders for ATO/ATC fuses.
- Use to install a blade-type automotive fuse between power source and device.
- Snap fuseholder closed around wire to pierce insulation automatically.
- Can be used with 18 - 14 gauge wire.
- Color: blue.
$0.00
FUSE HOLDER - ATO/ATC 20 AMP, 16 GAUGE LEADS
ATCFHA-1
- In-line fuse holder for ATO/ATC fuses
- Yellow fuseholder.
- Black, 16 gauge wire leads.
- 1-20 amps.
$0.00
FUSE HOLDER - ATO/ATC 30 AMP, 12 GAUGE, ENVIRO SEAL
ESATCFH
- In-line fuse holder for ATO/ATC fuses.
- Sealed, weather resistant fuse holder with mounting tab on cap.
- Funtional temperature range is -40° C to 125° C (-40° F to 260° F).
- Orange, 12 gauge wire leads.
- 30 amps.
$0.00
FUSE HOLDER - MINI 30 AMP, 12 GAUGE, ENVIRO SEAL
ESMINFH
- Designed for harsh environments and engine compartment conditions
- Silicone rubber seals protect the circuit from moisture, salt spray and engine compartment fluids
- Rated 2-30 amps
- 10" 12 gauge Type GXL leads
- Install with yellow 12-10 or blue 16-14 sealed butt connectors
- OEM quality components
$0.00
POWER DISTRIBUTION MODULE, AMI FUSES
XLMI1-E-1-0
- Provides efficient power distribution suitable for many under the hood applications.
- Used for main branch primary fusing.
- Black thermoplastic housing.
- Red EPDM protective cover.
- Stainless steel studs.
$0.00
FUSE HOLDER - MAXI FUSE 20-60 AMP, 8 GA W/COVER
XMAXFH
- In-line fuse holder for Maxi fuses.
- Attached dust cap.
- 12” wire.
- 8 Gauge.
- 60 amps.
$0.00
FUSE HOLDER - AMI/MIDI FUSE, W/COVER
XMIDFH1
- ATM/MIDI fuse holder with cover.
- Tap into an existing circuit to power accessories.
- Block fuseholder.
- 100 amp rating at 32 volts.
- Bolt down terminal style.
- Fuse not included.
$0.00
FUSE HOLDER - ATO/ATC 16 GAUGE WIRE LEADS WATERPROOF
XWPATCFH-16
- In-line fuse holder for ATO/ATC fuses.
- Red fuseholder with protective cap.
- Red, 16 gauge wire leads.
$0.00
FUSE HOLDER - ATO/ATC 14 GAUGE WIRE LEADS WATERPROOF
XWPATCFH-14
- Fuse holder for ATO/ATC fuses
- Fuse holder with waterproof cap
- 14 gauge wire leads
$0.00
FUSE HOLDER - ATO/ATC 30 AMP, 10 GAUGE W/COVER RED WIRE
XWPATCFH-10R
- In-Line fuse holder for ATO/ATC fuses
- Red fuse holder with splashproof cap
- 10 gauge wire leads
- 10 - 40 amps
$0.00
FUSE HOLDER - GLASS FUSES 30 AMP 18-12 GA CRIMP TYPE W/P
HFB
- Glass tube fuseholder.
- Water resistant crimp type holder.
- High visibility yellow.
- Accepts fuses to 30 amps.
- Accepts wire leads from 18 gauge to 12 gauge. (not included)
$0.00
FUSE HOLDER - GLASS FUSES 30 AMP 18-12 GA CRIMP TYPE
HHB
- Glass tube fuseholder.
- Universal crimp type holder.
- High visibility yellow.
- Accepts fuses to 30 amps.
- Accepts wire leads from 18 gauge to 12 gauge. (not included)
$0.00
FUSE HOLDER - ZCASE FUSES TOP POST BATTERY MOUNT, 2 OR 3 POSITONS, RUBBER COVER
XFHZC901
- Red rubber cover for 2 or 3 positon BMZ style fuse holder.
$0.00
FUSE HOLDER - ZCASE FUSES TOP POST BATTERY MOUNT, 2 POSITIONS
XFHZ882
- Mounts directly to the top post of a battery.
- 2 position.
- Uses Littelfuse ZCASE single fuses.
- Maximum continuous throughput 275 amps.
- Fusing directly at the battery allows location of larger power distribution boxes outside of the engine compartment.
$0.00
FUSE HOLDER - ATO/ATC 30 AMP, 12 GAUGE FOR ATC
XHHD
- In-line fuse holder for ATO/ATC fuses.
- Black fuseholder.
- Yellow, 12 gauge wire leads.
- 1-30 amps.
$0.00
- 1
- 2