Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
RIVET BACKUP WASHER ALUMINUM 3/16 1/2 O.D.
- They are used when fastening soft materials or to compensate for oversize holes.
- Washers are .056"-.062" thick.
- For hole size 3/16".
- Size: 1/2" round.
THREADED ROD UNC PLAIN 1/2"-13, GRADE B7, 3 FOOT LENGTH
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Typical Material: Chromium-Molybdenum Alloy Steel.
- Plating: plain.
- Tensile Strength: 125,000 PSI minimum.
- Diameter: 1/2"-13.
- 3 foot rod, fully threaded.
THREADED ROD UNC PLAIN 3/4"-10, GRADE B7, 3' LENGTH
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Typical Material: Chromium-Molybdenum Alloy Steel.
- Plating: plain.
- Tensile Strength: 125,000 PSI minimum.
- Diameter: 3/4"-10.
- 3 foot rod, fully threaded.
THREADED ROD UNC PLAIN 3/8"-16, GRADE B7, 3 FOOT LENGTH
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Typical Material: Chromium-Molybdenum Alloy Steel.
- Plating: plain.
- Tensile Strength: 125,000 PSI minimum.
- Diameter: 3/8"-16.
- 3 foot rod, fully threaded.
THREADED ROD UNC PLAIN 5/8"-11, GRADE B7, 3 FOOT LENGTH
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Typical Material: Chromium-Molybdenum Alloy Steel.
- Plating: plain.
- Tensile Strength: 125,000 PSI minimum.
- Diameter: 5/8"-11.
- 3 foot rod, fully threaded.
THREADED ROD UNC PLAIN 7/16"-14, GRADE B7, 3 FOOT LENGTH
- Commonly referred to as fully threaded rod.
- Used for general purpose fastening for anything from an anchor bolt to a through bolt.
- Typical Material: Chromium-Molybdenum Alloy Steel.
- Plating: plain.
- Tensile Strength: 125,000 PSI minimum.
- Diameter: 7/16"-14.
- 3 foot rod, fully threaded.
RIVET ALUM/STEEL MULTIGRIP BRAZIER HEAD 3/16 DIAM. GRIP .187-.437
- Wide Grip Range: Enables a single rivet to replace up to three different lengths of standard blind rivets
- Multi-grip rivets expand radially, filling the application hole, resulting in tighter joints and improved sealing
- The mandrel core is locked giving a weather tight, rattle resistant fastener.
- Grip Range: .187-.437
- Head Diameter: 0.472 Inch
- Head Height: .098
- Body Length: 0.730
- Mandrel Diameter: 0.112
LYNCH PIN 1/4 DIAMETER 1 9/16 PIN LENGTH
- 1/4" Standard ring
- Nominal size 1/4" x 1-9/16"
- Also called a Clik pin
CLIK PIN 3/16" X 1-9/16" 63-01
- Shank Length: 1-9/16"
- Effective Length: 1-1/4"
- Shank Diameter: 3/16"
- Carbon Steel
- Zinc Yellow
LYNCH PIN 5/16 DIAMETER 1 9/16 PIN LENGTH
- 5/16" standard ring
- Nominal size 5/16" x 1-9/16"
- Also called a Clik pin
SNAP PIN 3/8 X 2 1/2 SQUARE HANDLE DOUBLE WIRE
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 3/8" diameter
- 2-1/2" grip
SNAP PIN 5/16 X 2 1/2 DOUBLE WIRE
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 5/16" diameter
- 2-1/2" grip
SNAP PIN 1/4 X 2 1/2 DOUBLE WIRE HANDLE
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/2" grip
SNAP PIN DOUBLE WIRE HANDLE 5/16 X 1 3/4
- Shank Length: 2"
- Effective Length: 1-3/4"
- Round Two Wire Snap Pin
- Diameter: 5/16"
- Low Carbon Steel
- Zinc Clear
LYNCH PIN - TAB LOCK SING 1/4" X 2-1/2", SQUARE BAIL
- Tab-lock style single wire handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4" diameter
- 2-1/2" grip
FLAT WASHER BONDED SEALING 1/4" STAINLESS
- Neoprene Bonded Washer
- 18-8 Stainless
- Outside Diameter: 3/4"
CASTLE NUT ZINC 1/2"-20
- Slotted Steel Castle Nut
- Grade 2, Zinc plated finish
- 1/2" - 20 Fine thread size
- ASTM 563 quality standards
FINISH WASHER COUNTER-SUNK #12
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
FINISH WASHER COUNTER-SUNK #10
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.