Electrical
Electrical Supplies for Industrial, Fleet & Maintenance Applications
Keep your operations running with our comprehensive selection of commercial electrical supplies. Whether you're maintaining a facility, servicing a fleet, or outfitting mobile equipment, we deliver everything you need for fast, reliable electrical repairs and installations.
Batteries, Battery Cables & Booster Cables
Power your equipment and vehicles with our full range of industrial batteries, heavy-duty battery cables, and booster cables. Designed for high performance and durability to keep your fleet operational.
Battery Terminals, Lugs & Protection Accessories
Achieve secure, corrosion-resistant connections with our selection of battery terminals, lugs, and protection accessories for safe, efficient power distribution.
Terminals, Wire Connectors & Electrical Repair Supplies
Streamline electrical repairs with our assortment of terminals, wire connectors, and repair supplies. Designed for quick installation, secure connections, and long-term serviceability.
Heat Shrink Tubing, Electrical Tape & Solder Products
Protect and insulate your wiring with heat shrink tubing, electrical tape, and solder products. Improve reliability and prevent shorts.
Truck/Trailer Lighting, Industrial Lighting & Bulbs
Robust lighting solutions from truck and trailer lighting to industrial bulbs, built to withstand harsh conditions and deliver consistent performance.
Trailer Plugs, Forklift Connectors & Cord Ends
Ensure seamless connectivity for your fleet and equipment with trailer plugs, forklift connectors, and cord ends engineered for durability and easy installation.
FORKLIFT BATTERY CONNECTOR 2 GAUGE, 175 AMPS, GRAY KIT
XBHP2X
- 2 gauge 175 amp forklift connector kit.
- Comes with crimp lugs.
- Excellent for general commercial and industrial applications.
- Meets UL and CSA specifications.
- Grey housing.
- All housings are color keyed; grey will only mate with grey.
- Recommended 36 volts.
WIRE NUT, 14-18 GAUGE, PORCELAIN
XBLA10411
- Porcelain wire connectors.
- An excellent connector for high temperature (Over 150°s C) applications.
- Used in electrical, heating and cooking appliances.
- Large skirt opening permits fast wire entrance during hand or power drive assembly.
- Listed as pressure type connectors for joining combinations of solid and/or stranded wire.
- Rated 300 volts maximum.
BATTERY TERMINAL - SIDE POST BRASS BOLT 2/NUT FOR GM VEHICLES
XBSPB-GM
- Brass bolt extenders.
- For adding direct to battery auxiliary connections.
- Available in 1-3/4” short side bolt and 1-13/16” long side bolt.
SPLICE CAP INSULATOR, #10 TO #18 GAUGE
XBUC2007
- Closed-End Crimp Connector
- Designed for making fast, permanent, pressure-type connections.
- Insulation Material Nylon.
- Maximum Voltage 600 V
- Minimum Wire Combination (2) 18 AWG, Maximum Wire Combination (4) 12 AWG
TERMINAL STEP DOWN VINYL-INS 12-10 TO 16-14 GAUGE
XCB-646X-H
- TERMINAL STEP DOWN
- VINYL-INS
- 12-10 TO 16-14 GAUGE
BATTERY TERMINAL CRIMP-TOP 2 GAUGE, POS., STRAIGHT
XCBT2P
- Top post, straight crimpable battery terminal.
- Made of cast copper.
- Tin plated for added conductivity and corrosion resistance.
- Permanent, indelible, readable gauge & polarity printed on clamp.
- 25 times better than SAE conductivity standard, J163 & J1811.
- Nut and bolt included with terminal.
- Made in North America.
- 2 gauge, positive.
BATTERY TERMINAL CRIMP-TOP 6 GAUGE, NEG., STRAIGHT
XCBT6N
- Top post, straight crimpable battery terminal.
- Made of cast copper.
- Tin plated for added conductivity and corrosion resistance.
- Permanent, indelible, readable gauge & polarity printed on clamp.
- 25 times better than SAE conductivity standard, J163 & J1811.
- Nut and bolt included with terminal.
- Made in North America.
- 6 gauge, negative.
BATTERY TERMINAL CRIMP-TOP 6 GAUGE, POS., STRAIGHT
XCBT6P
- Top post, straight crimpable battery terminal.
- Made of cast copper.
- Tin plated for added conductivity and corrosion resistance.
- Permanent, indelible, readable gauge & polarity printed on clamp.
- 25 times better than SAE conductivity standard, J163 & J1811.
- Nut and bolt included with terminal.
- Made in North America.
- 6 gauge, positive.
BATTERY - LITHIUM CR2032 3 VOLTS
XCR2032
- CR1632 is the lithium coin cell battery that is commonly used in portable electronics gadgets which consume low power like watches, toys, RFID readers etc.
- These batteries can be used only through a cell holder, soldering or tampering the battery is not recommended.
- Nominal Voltage: 3V
- Battery Capacity: generally 225mAh
- Battery diameter: 20 mm
BATTERY - LITHIUM CR2025 3 VOLTS
XCR2025
- CR1632 is the lithium coin cell battery that is commonly used in portable electronics gadgets which consume low power like watches, toys, RFID readers etc.
- These batteries can be used only through a cell holder, soldering or tampering the battery is not recommended.
- Nominal Voltage: 3V
- Battery Capacity: generally 165mAh
- Battery diameter: 20 mm
DEUTSCH PIN HOUSING 6 CAVITY
XDT046
- Environmentally sealed connectors designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab.
- Provide reliability and performance at the lowest cost.
- Thermoplastic housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture.
- Dielectric Strength: 1500 volts minimum.
- Operative at temperatures from -67° F to 257° F.
DEUTSCH PIN HOUSING 12 CAVITY
XDT0412
- Environmentally sealed connectors designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab.
- Provide reliability and performance at the lowest cost.
- Thermoplastic housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture.
- Dielectric Strength: 1500 volts minimum.
- Operative at temperatures from -67° F to 257° F.
DEUTSCH PIN HOUSING 3 CAVITY J1939
XDT04-3P-P007
- 3-Pin splitter, connector receptacle
- 3-Pin connectors offer a high performance, reliable and cost effective solution for the SAE 3 position
- Y receptacle is designed to be completely compatible with existing industry standard J1939 connectors
DEUTSCH PIN HOUSING 8 CAVITY
XDT048
- Environmentally sealed connectors designed specifically for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab.
- Provide reliability and performance at the lowest cost.
- Thermoplastic housings and silicone seals are used to allow the connector to withstand conditions of extreme temperature and moisture.
- Dielectric Strength: 1500 volts minimum.
- Operative at temperatures from -67° F to 257° F.
Refine
14 More
27 More
105 More
7 More
99 More
47 More
27 More
5 More
5 More
8 More
33 More
25 More
9 More
2 More
23 More
8 More
4 More
12 More