Brass Fittings
AIR BRAKE MALE CONNECTOR 1/2" HOSE X 1/2" MALE PIPE
ABM12X12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE MALE CONNECTOR 1/2" HOSE X 3/8" MALE PIPE
ABM12X38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE MALE CONNECTOR 3/8" HOSE X 1/2" MALE PIPE, WITH SPRING
ABM38X12WS
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE MALE CONNECTOR 3/8" HOSE X 1/4" MALE PIPE, WITH SPRING
ABM38X14WS
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE MALE CONNECTOR 3/8" HOSE X 1/4" MALE PIPE
ABM38X14
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE MALE CONNECTOR 3/8" HOSE X 1/2" MALE PIPE
ABM38X12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE MALE CONNECTOR 3/8" HOSE X 3/8" MALE PIPE
ABM38X38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE NUT 1/2"
ABN12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE NUT 3/8"
ABN38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE SLEEVE 1/2"
ABS12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE SLEEVE 3/8"
ABS38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE ASSEMBLY UNION 1/2" HOSE
ABU12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
AIR BRAKE ASSEMBLY UNION 3/8" HOSE
ABU38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$0.00
HOSE END MALE PIPE RIGID 1/2" HOSE X 1/2" MALE PIPE
X10008B-108
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Male pipe rigid connector
- Size 1/2" hose i.d., 1/2" male pipe
$0.00
BRASS TUBE NUT INVERTED FLARE 3/16"
X100X3
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Tube nut
- Size 3/16" tubing o.d.
$0.00
BRASS TUBE NUT INVERTED FLARE 1/4"
X100X4
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Tube nut
- Size 1/4" tubing o.d.
$0.00
BRASS TUBE NUT INVERTED FLARE 5/16"
X100X5
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- Tube nut
- Size 5/16" tubing o.d.
$0.00
PUSH TO CONNECT, NON-DOT, BRASS UNION, 1/8" TUBE
X1162X2
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
$0.00
PUSH TO CONNECT, NON-DOT, BRASS UNION, 3/16" TUBE
X1162X3
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
$0.00
PUSH TO CONNECT, NON-DOT BRASS UNION, 1/4" TUBE
X1162X4
- Push to connect fitting
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
- Size 1/4" tubing o.d.
$0.00
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, 90 DEGREE ELBOW UNION, 1/4" TUBE
X1165X4
- Push to connect fitting
- Designed to be used with no tube support.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- Union elbow.
- Used with most thermoplastic tubing.
- Union elbow connector
- Size 1/4" tubing o.d.
$0.00
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, STRAIGHT MALE CONNECTOR, 1/4" TUBE X 1/8" PIPE
X1168X4
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
$0.00
Refine
4 More
11 More
3 More
8 More
4 More
4 More
7 More
1 More