Adhesives
STA-PUT SPRAY ADHESIVE FOR POLYSTYRENE FOAM
XSP213ACC
- 13 ounce Clear, Foam
- Permanently bonds Styrofoam and other polystyrene materials in 4 minutes of less
- Pressure sensitive and water resistant
STA PUT SP80 CLEAR AEROSOL 13 OUNCE
XSP2726845
- Aersol Contact Adhesive, Clear
- Hi-Strength Low VOC
- Bonds laminate, wood products, most metals, urethane foams, particle board and many other materials
- Non-chlorinated
- Solvent based, Water Resistant
- High strength, grab and tack
SUPER GLUE - 3 GRAM TUBE CARDED
XDY49403
- 3 gram bottle (.10 oz.).
- Holding strength to 5000 psi.
- Instantly bonds glass, metals, plastics and rubber.
- Permanent, transparent bond fills gaps to .004" in seconds.
- Works on aluminum, copper, brass, steel, vinyl, PVC, polyester, nylon, fiberglass and wood.
- Temperature range of -65° to 175° F.
- Ready to use, no mixing.
EPOXY 4 MINUTE 2 PART 1 OZ.
XDY49409
- Pre-measured sytinge assures proper mix for consistent results.
- Repairs plastic, wood, metal, glass and ceramic.
- Sets in 4 minutes.
- Works up to 180°F.
- Net weight 1 ounce.
SUPER GLUE 20 GR. BOTTLE WITH APPLICATOR TIP
XDY49431
- Instanly bonds glass, metals, plastics and rubber.
- Bonds close fitting part in seconds.
- Works on aluminum, copper, brass, steel, vinyl, PVC, polyster, nylon, fiberglass and wood.
- Holding strength to 5000 psi.
- Net weight 20g.
E 6000 ADHESIVE/SEALANT 10.2
XE60HVC
- A unique adhesive formulated to meet high-performance industrial requirements.
- Exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete.
- It also adheres strongly to leather, rubber, vinyl and many plastics.
- Maintains its flexibility in cold temperatures and may be used to bond items subject to vibration.
- It is not formulated for exposure to sunlight.
- 100% paintable with oil and water based paints when dry.
- Can be submerged in fresh and salt water after complete cure.
E 6000 ADHESIVE 3.7 OZ TUBE CLEAR
XE60HVT
- A unique adhesive formulated to meet high-performance industrial requirements.
- Exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete.
- It also adheres strongly to leather, rubber, vinyl and many plastics.
- Maintains its flexibility in cold temperatures and may be used to bond items subject to vibration.
- It is not formulated for exposure to sunlight.
- 100% paintable with oil and water based paints when dry.
- Can be submerged in fresh and salt water after complete cure.
E 6100 ADHESIVE SEALANT 10.2 Clear
XE61NSC
- A unique non-slump adhesive formulated to meet high-performance industrial requirements.
- Will not sag, drip or run, and can be used in applications that require vertical and horizontal hold.
- Has exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, vinyl and many plastics.
- Maintains its flexibility in cold temperatures and may used to bond items subject to vibration.
- It is not formulated for exposure to sunlight.
- 100% paintable with oil and water based paints when dry.
- Safe for applications exposed to dilute acids and dilute caustics.
- Can be submerged in fresh and salt water after complete cure.
PERMATEX HIGH TACK ADHESIVE SEALANT 4 OZ.
XAP98H
- Permatex high tack gasket sealant.
- Net 4 ounce brush top can.
- A reliable general adhesive.
- Remains effective under temperatures of -65°F to 500° F.
- Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.
- Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film.
- Suggested applications include valve covers, fuel pumps, carburetors and manifold gaskets.