Bolts
HEX CAP SCREW BOLT METRIC ZINC M20-2.50 X 70, CL 10.9
X20X70M10.9
- Greater tensile strength than class 8.8 bolts.
- Heat treated.
- Hex head cap screw with metric threads pitch made from medium carbon alloy steel.
- Metric coarse and fine threads.
- Most comparable but not exactly equivalent to US grade 8 cap screws.
$0.00
HEX CAP SCREW UNC STAINLESS 1/2"-13 X 3-1/2"
X12312CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 1/2"-13.
$0.00
FRAME BOLT FLANGE HD UNC ZINC, NON-SERRATED, 1/2"-13 X 1-1/2" GR 8
X12X112CFL8Z
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Zinc finish.
$0.00
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 1/2"-13 X 1-1/4" GR8
X12X114CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 1/2"-13.
- Length: 1-1/4".
$0.00
FRAME BOLT FLANGE HEAD, NON SERRATED, UNC ZINC 1/2"-13 X 1-1/4" GR 8
X12X114CFL8Z
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Zinc finish.
$0.00
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 1/2"-13 X 2-1/2" GR8
X12X212CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 1/2"-13.
- Length: 2-1/2".
$0.00
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 1" THREAD CUTTING
X1420X1HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
$0.00
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-1/2" STAINLESS
X1420X212FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
MACHINE SCREW PHIL FLAT HD 1/4"-20 X 2-3/4" STAINLESS
X1420X234FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
MACHINE SCREW HEX HEAD TYP-F 1/4"-20 X 2" THREAD CUTTING
X1420X2HTYF
- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 1/4-20 diameter.
- Length of 2".
$0.00
SOCKET HEAD CAPSCREW UNC STAINLESS 1/4"-20 X 3/4"
X1420X34SHCS
- Stainless Steel
- Cylindrical head with a flat chamfered top surface.
- Knurled cylindrical sides and hexagonal recess.
- Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
- Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
- Diameter: 1/4-20"
- Length: 3/4"
$0.00
MACHINE SCREW PHIL PAN HD 1/4"-20 X 3" STAINLESS
X1420X3PSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Pan head Phillips.
- 1/4-20 diameter.
- Length of 3".
$0.00
HEX CAP SCREW BOLT UNC ZINC 3/8"-16 X 3/4", GR 8
38X34C8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 3/8"-16.
- Length: 3/4".
$0.00
HEX CAP SCREW BOLT UNC ZINC 1/2"-13 X 2", GR 8
12X2C8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 1/2"-13.
- Length: 2".
$0.00
MACHINE SCREW PHIL TRUSS HD 5/16"-18 X 1-1/4" STAINLESS
X5618X114THPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
HEX CAP SCREW BOLT 1/2-13" X 1-1/2" GR 8 ZY
12X112C8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 1/2"-13.
- Length: 1-1/2".
$0.00
HEX CAP SCREW BOLT UNC ZINC 3/8"-16 X 2-3/4", GR 8
38X234C8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 3/8"-16.
- Length: 2-3/4".
$0.00
HEX CAP SCREW UNC STAINLESS 1/2"-13" X 4"
X124CSS
- Hex Cap Screw
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications
- Tensile strength: 100,000 psi. minimum
- 18-8 Stainless Steel
- Diameter: 1/2"-13
- Length: 4"
$0.00
MACHINE SCREW PHIL PAN HD #6-32 X 1/2" STAINLESS
X632X12PSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
- Made from 18-8 stainless
- Pan head Phillips.
- 6-32 diameter.
- Length of 1/2".
$0.00
HEX CAP SCREW BOLT UNF ZINC 7/16"-20 X 1-1/2", GR 8
76X112F8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 7/16"-20.
- Length: 1-1/2".
$0.00
HEX CAP SCREW BOLT UNC ZINC 1/4"-20 X 1-1/4", GR 8
14X114C8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 1/4"-20.
- Length: 1-1/4".
$0.00