Bolts
MACHINE SCREW PHIL FLAT HD #10-32 X 1/2" STAINLESS
X1032X12FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
HEX CAP SCREW BOLT METRIC ZINC M10-1.25 X 30 CL 8.8
X10X1.25X30M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M10-1.25.
- Length: 30 mm.
$0.00
HEX CAP SCREW BOLT METRIC ZINC M10-1.25 X 35 CL 8.8
X10X1.25X35M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M10-1.25.
- Length: 35 mm.
$0.00
HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 60 CL 10.9
X10X60M10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M10-1.50.
- Length: 60 mm.
$0.00
HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 80, CL 10.9
X10X80M10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M10-1.50.
- Length: 80 mm.
- Class 10.9
$0.00
SOCKET HEAD CAPSCREW UNC PLAIN 1/2"-13 X 1-1/2"
X1213X112SHC
- Made from alloy steel.
- Cylindrical head with a flat chamfered top surface.
- Knurled cylindrical sides and hexagonal recess.
- Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
- Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
- Plain black finish.
- Diameter: 1/2-13"
- Length: 1-1/2"
$0.00
MACHINE SCREW PHIL TRUSS HD 3/8"-16 X 1-1/2" STAINLESS
X3816X112THPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 3/8"-16 X 1-1/2" GR8
X38X112CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter:3/8"-16.
- Length: 1-1/2".
$0.00
HEX CAP SCREW BOLT UNC FULLY THREADED ZINC 3/8"-16 X 1-1/2" GR 2
X38X112CTAP
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 74,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
$0.00
CARRIAGE BOLT UNC ZINC 3/8"-16 X 2-1/2" GR A
X38X212CB
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 3/8"-16.
- Length: 2-1/2".
$0.00
HEX CAP SCREW BOLT 3/8"-16 X 3-1/4" GR 8 ZINC
X38X314C8
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 3/8"-16.
$0.00
MACHINE SCREW PHIL FLAT HD #4-40 X 1/2" STAINLESS
X440X12FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
MACHINE SCREW PHIL PAN HD #4-40 X 5/8" STAINLESS
X440X58PSS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
$0.00
MACHINE SCREW PHIL TRUSS HD 5/16"-18 X 3/4" STAINLESS
X5618X34THPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
CARRIAGE BOLT UNC ZINC 5/16"-18 X 1-1/2" GR A
X56X112CB
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/16"-18.
- Length: 1-1/2".
$0.00
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 5/16"-18 X 1-1/2" GR8
X56X112CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/16"-18.
- Length: 1-1/2".
$0.00
HEX CAP SCREW UNC STAINLESS 5/8"-11 X 2-1/2"
X58212CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
$0.00
HEX CAP SCREW UNC STAINLESS 5/8"-11 X 2-1/4"
X58214CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
$0.00
HEX CAP SCREW UNC STAINLESS 5/8"-11 X 3"
X583CSS
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
$0.00
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 5/8"-11 X 1-1/2" GR8
X58X112CFL8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/8"-11.
- Length: 1-1/2".
$0.00
MACHINE SCREW PHIL FLAT HD #6-32 X 1/2" STAINLESS
X632X12FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
MACHINE SCREW PHIL FLAT HD #6-32 X 1" STAINLESS
X632X1FHPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
SOCKET HEAD CAPSCREW UNC PLAIN #6-32 X 1"
X632X1SHC
- Made from alloy steel.
- Cylindrical head with a flat chamfered top surface.
- Knurled cylindrical sides and hexagonal recess.
- Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
- Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
- Plain black finish.
- Diameter: #6-32
- Length: 1"
$0.00
MACHINE SCREW PHIL TRUSS HD #6-32 X 3/4" STAINLESS
X632X34THPS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
- Used in food processing machinery and refrigeration equipment.
- Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
$0.00
HEX CAP SCREW BOLT METRIC ZINC M8-1.00 X 30 CL 8.8
X8X1.0X30M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M8-1.0.
- Length: 30 mm.
$0.00